W11 3 Rollers Plate Rolling Machine
Introduction
The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the nut, the worm and the lead screw. The two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the lower rollers.This device is three rollers symmetrical mechanical rolling machine. It is used toBend steel into drums shape with different diameters. And it is widely used in boiler industry, chemical industry, mine industry, building industry, shipbuilding industry
Working Principle
This machine is symmetrical rolling machine, down up roller and then let up and down rollers do opposite roll to bend steel plate.
This machine composed of two parts those are working part welded in whole chassis and moving part. Working part composed of left and right bearing base,one up roller, two bottom rollers (the material of the three rollers is 42CrMo and do heat treatment),lifting screw and turbine and other accessory parts. Down rollers drive up roller to move, up roller can do up and down move by height way. Drive part composed of main motor, main speed reducer and other accessory parts.
Bottom rollers were drove by main motor through main speed reducer, output spindle of main speed reducer driven to two down rollers by one group gears, the revolve direction of rollers adjusted by main motor.
Upper roll lifted by accessory motor through vice speed reducer drive worm and worm wheel mechanism of right/left rolls bearing base. That to let the lifting pole do up and down move.
Unloading device is designed to remove the workpiece after drums bended into shape. Before unloading the upper rolls move to up limit position, the balance device on upper rolls ends hit upper rolls ,draw out the spindle of the pin ,then to remove the workpiece
Packaging
Body part Up and bottom rollers devices, main motor device, balance device, rack of machine,base and so on
Electrical control system
Lubrication system
Components related to the whole machine
Spare part provide by machine
Technical files provide by machine
Parameters
Warranty
Our guarantee time is 5 years from B/L date. If any component is damaged during guarantee time, we can send the component to the customer by DHL, TNT freely.
Our factory can send our engineer to the customer's factory install, commission and training freely. The customer provide the double trip tickets, food and accommodation for our engineer. The customer also can send the engineer to our factory to learn the operation and maintains freely.
Our factory provide the service for the customer forever, if the customer need operation help, can contact us by MSN, Skype, Email and Telephone at any time, we provide 24 hours on-line service.
Introduction
The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the nut, the worm and the lead screw. The two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the lower rollers.This device is three rollers symmetrical mechanical rolling machine. It is used toBend steel into drums shape with different diameters. And it is widely used in boiler industry, chemical industry, mine industry, building industry, shipbuilding industry
Working Principle
This machine is symmetrical rolling machine, down up roller and then let up and down rollers do opposite roll to bend steel plate.
This machine composed of two parts those are working part welded in whole chassis and moving part. Working part composed of left and right bearing base,one up roller, two bottom rollers (the material of the three rollers is 42CrMo and do heat treatment),lifting screw and turbine and other accessory parts. Down rollers drive up roller to move, up roller can do up and down move by height way. Drive part composed of main motor, main speed reducer and other accessory parts.
Bottom rollers were drove by main motor through main speed reducer, output spindle of main speed reducer driven to two down rollers by one group gears, the revolve direction of rollers adjusted by main motor.
Upper roll lifted by accessory motor through vice speed reducer drive worm and worm wheel mechanism of right/left rolls bearing base. That to let the lifting pole do up and down move.
Unloading device is designed to remove the workpiece after drums bended into shape. Before unloading the upper rolls move to up limit position, the balance device on upper rolls ends hit upper rolls ,draw out the spindle of the pin ,then to remove the workpiece
Packaging
Body part Up and bottom rollers devices, main motor device, balance device, rack of machine,base and so on
Electrical control system
Lubrication system
Components related to the whole machine
Spare part provide by machine
Technical files provide by machine
Parameters
Model W11 | Max rolling thickness | Max pre-rolling thickness | Plate width | Diameter of upper roller | Main motor power |
(mm) | (mm) | (mm) | (mm) | (kw) | |
12*2000 | 12 | 10 | 2000 | 250 | 5.5 |
16*2500 | 16 | 12 | 2500 | 300 | 15 |
18*3000 | 18 | 14 | 3000 | 350 | 15 |
20*3000 | 20 | 16 | 3000 | 375 | 22 |
30*3000 | 30 | 25 | 3000 | 450 | 30 |
40*4000 | 40 | 35 | 4000 | 630 | 55 |
45*4000 | 45 | 40 | 4000 | 660 | 75 |
50*4000 | 50 | 45 | 4000 | 700 | 75 |
60*4000 | 60 | 55 | 4000 | 780 | 90 |
70*4000 | 70 | 65 | 4000 | 840 | 110 |
80*4000 | 80 | 75 | 4000 | 900 | 110 |
90*3000 | 90 | 80 | 3000 | 800 | 90 |
100*4000 | 100 | 85 | 4000 | 940 | 2*55 |
110*4000 | 110 | 95 | 4000 | 990 | 2*75 |
120*3000 | 120 | 100 | 3000 | 960 | 2*55 |
130*3000 | 130 | 110 | 3000 | 980 | 2*75 |
150*3000 | 150 | 120 | 3000 | 990 | 2*75 |
160*4000 | 160 | 130 | 4000 | 1260 | 2*90 |
Warranty
Our guarantee time is 5 years from B/L date. If any component is damaged during guarantee time, we can send the component to the customer by DHL, TNT freely.
Our factory can send our engineer to the customer's factory install, commission and training freely. The customer provide the double trip tickets, food and accommodation for our engineer. The customer also can send the engineer to our factory to learn the operation and maintains freely.
Our factory provide the service for the customer forever, if the customer need operation help, can contact us by MSN, Skype, Email and Telephone at any time, we provide 24 hours on-line service.